Linitop Vernis

Colourless, protective & decorative high resistance varnish for interior wood

At A Glance...

  • Enriched with polyurethane resins for longer resistance
  • Decorates and waterproofs interior wood surfaces
  • Enhances the natural beauty of the wood
  • Resistant to abrasion, scratches and water, plus will not yellow
  • Solvent-based colourless varnish available in deep matt, satin or gloss finishes
(all prices are excluding VAT)

Linitop Vernis is a solvent-based colourless, protective and decorative high resistance varnish designed especially for use on interior wood surfaces. It is enriched with polyurethane resins giving it excellent resistance to abrasion, scratches and water and is perfect for a wide range of interior wood varnish projects including paneling, window and door frames, furniture, table tops and more.

This highly flexible solvent-based varnish decorates and waterproofs the wood whilst also enhancing its natural beauty and it is available in deep matt, satin and gloss finishes. It can also be used with a wood stain underneath to produce a coloured finish, for example you can pre-treat your wood with coloured woodstain Linitop Primer & Finish and then use 2 coats of Linitop Vernis on top.

Linitop Acryl Vernis is a solvent-based varnish which is easy to apply and has excellent flow whilst giving a beautiful decorative finish. It can be applied to old, clean, well-adhered and roughened varnish and can be applied with a brush or roller. It is gives maximum protection of the surface and will not peel or flake due to the high flexibility of the film.

What can I use Linitop Vernis interior wood varnish for?

  • Protecting and decorating door and window frames
  • Enhancing the natural look of banisters and paneling
  • Preventing scratches and abrasions on table tops
  • Protecting treasured furniture from damage
  • Replacing old varnish which has roughened

Tips from the professionals

  • Preferably use a short mohair roller
  • To fill small surface imperfections first apply a coat of dilute Linitop Vernis. Next apply a coat of Bouche-Pores Grain Filler and sand lightly after hardening and dust off. Finish with a coat of Linitop Vernis and repeat the process if necessary.
  • Apply Linitop Vernis in the direction of the wood grain, criss cross the passes and even them out
  • If you want a coloured finish, first apply 1 coat of Linitop Primer & Finish. Then after drying but without sanding, complete with 2 coats of Linitop Vernis (sanding between coats).
  • For an optimum finish, round the corners of the wood by manual sanding and then dust off
  • Pay particular attention to grooves and butts
  • When applying by spray, always back-brush or back-roll to avoid runs and aid the penetration of the finish
  • For the first coat, dilute with white spirit between 5 and 10% – do the same when applying with a spray gun

Reviews

There are no reviews yet.

Be the first to review “Linitop Vernis”

How much do I need?

< Calculate Again
This coverage indication is only a guide and actual coverage is dependent on wood type, age, porosity etc.

Technical Data

Read the full technical information for Linitop Vernis including MSDS on our corporate website.